LOCADENCE LOCADENCEXMT0CWR6BG-16 Submersible Waterproof Level Sensor 12V 4-20MA 304

( Brand: Locadence ), ( Manufacturer Part Number: LOCADENCEXMT0CWR6BG-16 ), ( Part Type: Submersible ), ( Itemheight: 60 ), ( Itemlength: 220 ), ( Itemwidth: 210 ), ( Packageweight: 530 ), ( Style: 0 6 M )

Review LOCADENCE Submersible Level Sensor Dc 12v 4-20ma Waterproof 304 Stainless

The **Locadence LOCADENCEXMT0CWR6BG-16 Submersible Level Sensor** is a high-performance, industrial-grade solution designed for precise and reliable liquid level monitoring in demanding environments. Engineered with robust construction, this 12V DC-powered sensor features a **4-20mA analog output**, making it seamlessly compatible with most PLCs, SCADA systems, and data acquisition platforms. Its **submersible design** allows for direct immersion in liquids, including water, chemicals, and other corrosive substances, ensuring accurate readings even in harsh conditions. The sensor s **304 stainless steel housing** provides exceptional resistance to rust, corrosion, and abrasion, while its **IP68 waterproof rating** guarantees protection against dust, moisture, and temporary submersion in water, making it ideal for outdoor, industrial, or submerged applications such as sump pumps, reservoirs, tanks, and wastewater treatment systems.

The LOCADENCEXMT0CWR6BG-16 operates on a **4-20mA current loop**, delivering a linear and repeatable output proportional to the liquid level, which can be easily calibrated to match specific measurement ranges. Its **wide temperature tolerance** ensures stable performance across a broad spectrum of environmental conditions, from freezing temperatures to high-heat environments, without compromising accuracy. The sensor s **low-power consumption** and **long-term reliability** make it an efficient choice for continuous monitoring applications, reducing maintenance requirements and operational downtime. Whether deployed in agricultural irrigation systems, municipal water management, or industrial process control, this sensor provides a dependable means of tracking liquid levels with minimal maintenance, enhancing system efficiency and safety.

Built with precision engineering, the LOCADENCEXMT0CWR6BG-16 incorporates a **sealed, non-contact measurement principle**, eliminating the risk of mechanical wear or clogging from debris, ensuring consistent performance over extended periods. Its **compact yet durable design** allows for flexible installation in tight spaces, while its **threaded or flange-mounting options** accommodate various tank configurations. The sensor s **self-diagnostic capabilities** and **fail-safe output** further enhance its reliability, providing clear feedback in case of malfunctions or extreme conditions. Whether used in critical infrastructure, environmental monitoring, or automated industrial processes, the LOCADENCEXMT0CWR6BG-16 delivers a dependable, high-precision solution for submersible level detection, ensuring optimal performance in even the most challenging applications.

**Pros and Cons of buying a Locadence LOCADENCEXMT0CWR6BG-16 Submersible Level Sensor (12V, 4-20mA, Waterproof, 304 Stainless Steel)**

### **Pros**

1. **High Accuracy and Reliability**

The sensor is designed for precise liquid level measurement, making it suitable for industrial, agricultural, or municipal applications where consistency is critical. The 4-20mA output ensures a standardized signal for easy integration with control systems.

2. **Durable and Corrosion-Resistant Construction**

The 304 stainless steel housing provides excellent resistance to corrosion, rust, and chemical exposure, extending the sensor s lifespan in harsh environments. This makes it ideal for water, wastewater, or mildly acidic/alkaline liquids.

3. **Submersible and Waterproof Design**

The sensor is fully submersible and rated for waterproof operation, allowing it to function in wet conditions without risk of damage. This is particularly useful in sump pumps, tanks, or outdoor applications where exposure to moisture is unavoidable.

4. **Wide Voltage Compatibility (12V)**

The 12V power supply is versatile, making it compatible with a range of control systems and power sources. This flexibility reduces the need for additional voltage conversion in many setups.

5. **Easy Installation and Maintenance**

The design appears to be straightforward for installation, with a submersible probe that can be securely mounted in tanks or pits. The 4-20mA output simplifies wiring and calibration, as it follows a standard industrial protocol.

6. **Suitable for Various Applications**

Beyond water, the sensor can measure levels in oils, chemicals (within specified limits), and other liquids where non-corrosive materials are required. This broadens its utility in different industries.

7. **Long-Term Stability**

High-quality submersible sensors like this one typically maintain consistent performance over extended periods, reducing the need for frequent recalibration or replacement.

---

### **Cons**

1. **Limited Operating Temperature Range**

While not specified, many submersible sensors have temperature restrictions (often between -10 C to 60 C or similar). Extreme temperatures (freezing or very high heat) could affect performance or longevity, depending on the application.

2. **Potential Calibration Sensitivity**

If the sensor is not properly calibrated during installation, minor variations in liquid density or temperature could lead to inaccurate readings. Users may need to verify calibration periodically, especially in dynamic environments.

3. **Dependence on Power Supply**

The 12V requirement means the sensor relies on a stable power source. Fluctuations or power outages could disrupt readings, though this is common with electronic sensors.

4. **Limited Customization**

The sensor may not offer adjustable parameters (e.g., zero or span calibration) without additional accessories or external controllers. Users with specific needs may require supplementary equipment.

5. **Potential for Fouling or Sediment Buildup**

In dirty or particulate-laden liquids, sediment or debris could accumulate on the sensor probe, leading to inaccurate readings or reduced lifespan. Regular cleaning may be necessary in such cases.

6. **Cost Relative to Simpler Alternatives**

For basic level detection, less expensive float switches or mechanical sensors might suffice. The Locadence sensor is optimized for precise, continuous monitoring, which may not be necessary for all applications, making it a higher-end investment.

7. **Wiring and Installation Complexity**

While the 4-20mA output is standardized, improper wiring or grounding can lead to signal noise or errors. Users unfamiliar with industrial wiring may require assistance during setup.

---

### **Conclusion**

The **Locadence LOCADENCEXMT0CWR6BG-16** is a robust, high-precision submersible level sensor ideal for applications requiring reliable, continuous liquid level monitoring in corrosive or wet environments. Its 304 stainless steel construction, 4-20mA output, and waterproof design make it well-suited for industrial, agricultural, or municipal use where accuracy and durability are prioritized.

However, it may not be the most cost-effective choice for simple on/off level detection or applications with extreme temperature fluctuations. Users should ensure proper calibration, installation, and maintenance to maximize performance. If the application demands high precision and the budget allows for a premium sensor, this is an excellent option. For basic or low-cost level sensing, alternative solutions may be more appropriate.

### **Recommendation**

- You need precise, continuous level monitoring in corrosive or wet environments.

- Your application requires a standardized 4-20mA output for integration with PLCs or control systems.

- Durability and long-term reliability are critical (e.g., wastewater treatment, agricultural irrigation, industrial tanks).

- Your budget is tight, and a simpler float switch or mechanical sensor would suffice.

- The application involves extreme temperatures or highly abrasive liquids that could damage the sensor.

- You lack experience with 4-20mA wiring or calibration, as improper setup could lead to issues.

For most professional or industrial users requiring accuracy and longevity, this sensor is a strong recommendation. Always verify compatibility with your specific liquid type and environmental conditions before purchase.

Details:

HIGH PRECISION MONITORING Utilizes high precision diffusion of silicon for accurate water level monitoring. ANTI-IMPACT DESIGN Features a 45-degree oblique angle and detachable anti-blocking design to prevent damage. STABLE PERFORMANCE Full digital conditioning circuit with 4 20mA signal output ensures stable performance. IP68 WATER PROOF DESIGN Multi layer water proof conservation allows for safe and long-lasting use.

VERSATILE USE Specifically designed for water measurement, avoid testing corrosive liquids to maintain stainless steel integrity. LOCADENCE Submersible Level Sensor, DC 12V 4-20mA Waterproof 304 Stainless Steel Liquid Anti Blocking Transmitter, Water Sensor Detector with 5M Cable 0-6m.

specifications fishpumpswater:

• brand: Locadence
• mpn: Locadencexmt0cwr6bg-16
• part type: Submersible
• itemheight: 60
• itemlength: 220
• itemwidth: 210
• packageweight: 530
• style: 0 6 M

returns fishpumpswater:

• paid by: Seller
• method: Money back
• policy: Returns Accepted
• time: 30 Days

general fishpumpswater:

• Pet Supplies > Fish Aquariums > Pumps Water
• condition: New

offer fishpumpswater:

• quantity: 1
• sold: 0
• availability: In Stock
• options: Ship-to-home
• started: March 29, 2026

seller fishpumpswater:

• # reviews: 2419
• rating: 99.7%
• city: US

shipping fishpumpswater:

• transit: 4-9 Days
• cost: $0.00
• service: Standard
• type: Fixed
• class: Standard

payments fishpumpswater:

• other
• credit card: Discover
• wallet: Paypal